ENVIROMUX-16DDP Large Enterprise Environment Monitoring System

Зургийг бүтэн харахын тулд зурган дээр хоёр дарна уу.

Zoom Out
Zoom In

ENVIROMUX-16DDP Large Enterprise Environment Monitoring System

IN STOCK

Quick Overview

 


16 external configurable sensors, 8 digital inputs, 4 output relays, Monitor (ping) up to 64 IP network devices, Stores up to 1,000 event and data entries in system data log, dual AC

4,402,300 ₮

Дэлгэрэнгүй

  • Depth : 254.25 mm
  • Digital Inputs : Eight screw terminals pairs for connecting dry contact devices. Input voltage: 0VDC to +25VDC. Provides +12VDC, 50 mA. Fuse protection.
  • Digital Outputs : Four screw terminals pairs. Potential-free relay switch contacts. Normally open / normally closed connection points. Maximum switching load: 0.5A at 100VAC, 1A at 30VDC, 0.5A at 48VDC.
  • Height : 44.45 mm
  • Width : 411.23 mm
  • Dimensions : WxDxH (in): Without supplied rackmount kit : 16.19x10.01x1.75. With supplied rackmount kit: 19x10.01x1.75.
  • Regulatory Approvals : CE, RoHS.
  • Regulatory Compliance : CE, RoHS
  • Protocols : HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, LDAPv3, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0. Compatible with any SNMP management software. Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB/RJ45 serial interface. An IP address can be assigned to the ENVIROMUX-16D automatically by a DHCP server. Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem). Alerts are posted in event log, which is accessible through Web user interface. Email alerts can be sent to 17 addresses. Users can configure the schedule for when they will be alerted, as well as customize the e-mail subject line for each sensor alert. SNMP traps have unique OID's (Object Identifiers) for each sensor.
  • Ethernet Port : One 10/100 Base-T Ethernet port with RJ45 Ethernet connector. Supports full- and half-duplex.
  • Environmental : Operating temperature: (0 to 40°C).
  • Storage temperature:  (-30 to 60°C).
  • Operating /Storage Relative Humidity: 17 to 90% non-condensing RH.
  • Back-up Battery : Rechargeable sealed lead-acid battery. Provides back-up for one hour.
  • Aux Power : One screw terminal pair. Provides +12 VDC, 500 mA.
  • Cascade IN/OUT Ports : Two RJ45 jacks. A maximum of 5 systems can be used in a cascaded configuration via RS485 to increase the number of sensor ports (1 master, 4 slaves). Each slave unit needs its own unique RS485 address value that can range from 1-255. Use CAT5/5e/6 patch cables with RJ45 connectors wired straight through Up to 4,000 feet between the master unit and the slave unit. The last slave must have a terminating plug (ENVIROMUX-TRMPLG, not included) in the empty socket. Uses a single Web interface for all systems connected.
  • Certifications : CE, RoHS
  • Power Port : 110 or 230 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.) Power consumption: 35W Connection for Earth Ground. Fuse protection. Optional dual power. If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the battery backup.
  • RJ45 Sensor Ports : Sixteen RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass break, vibration and motion sensors.
  • Beacon Port : One screw terminal pair. Provides +12VDC, 180 mA to supply an alarm beacon. Fuse protection
  • Siren Port : One screw terminal pair. Provides +12VDC, 180 mA to supply a siren. Fuse protection
  • USB Device Ports : Four female USB Type A connectors for connecting USB modem, for downloading log data to USB flash drive, or for connecting a USB LCD screen. Two USB ports on front panel and 2 on back panel.
  • USB Console Port : One female USB Type B connector for connecting a PC for serial terminal access.
  • RS232 (DCS) Port : One female RJ45 serial port for terminal access.
  • Internal Temperature Sensor : Applications from (0 to 40°C). Accurate to within (±0.75°C).
  • Internal Humidity Sensor : Applications from 20% to 80% relative humidity at temperatures between (0 to 40°C). Accurate to within ±5% relative humidity.
  • Internal Power Sensor : Measures mains voltage: 0 to 255 VAC. Measures battery voltage: 0 to 20 VDC. Alerts are sent when there is a power outage and when power returns.
  • Operating Temperature (Maximum) : 40 C
  • Operating Temperature (Minimum) : 0 C
  • AC Voltage (Minimum) : 100 Volts
  • AC Voltage (Maximum) : 240 Volts
  • RS232 AUX Port : One RJ45 port for connecting a serial GSM modem or a remote serially-controlled device.

 

  1. Бүтээгдэхүүний анхны сэтгэгдлийг үлдээнэ үү.

Өөрийн сэтгэгдлээ бичнэ үү

Таны хэлэлцэж буй: ENVIROMUX-16DDP Large Enterprise Environment Monitoring System